Racing Green TVR. - Tuscan 2, Speedo transducer, standard

Parts Line
+44 (0) 1252 894797

Tuscan 2 >Electrical and electronics

Speedo transducer, standard
Part No TVR M1889

Speedo transducer to fit all TVR Speed 6 models apart from Cerbera. This is the transducer with blue wiring and is the latest version fitted. Earlier versions should be upgraded to this product when problems arise. Note it does not come with the correct connector to fit directly but does come with instructions. The air gap should be set to 28 thou to give good readings with the notch in the thread set in the horizontal plane.It may, in some very rare circumstances, require the hole in the mounting bracket enlarging. It comes with a wiring diagram to explain the component and these should be connected as follows;12v ign to the green wire, earth to the black wire and sensor output red to the grey wire(colours refer to the vehicle harness). Please call if you need more information. Please see new part number TVR M1889 RG as this is a new high specification sensor suitable for all later applications and replaces this sensor at a better price.

POA

Speedo transducer TVR M1889 - Click here to enlarge image

Related Parts:

Differential
Part No - TVR R0663

Hydratrak differential for late Sagaris and Tuscan 2

Differential hydratrak 3.46 late (2005 on)

Speedo transducer, ultra high specification
Part No - TVR M1889 RG

Speedo transducer to fit all TVR Speed 6 models apart from Cerbera

TVR Parts | Contact | Terms & Conditions | Privacy | How to Buy