Racing Green TVR. - Tuscan, Cylinder head gasket

Parts Line
+44 (0) 1252 894797

Tuscan >Upgrades

Cylinder head gasket
Part No TVR E6026 MLS 98

Ultra high performance MLS head gasket for the TVR Speed 6 engine. This is a very high performance multilayer steel cylinder head gasket for all TVR Speed 6 engines. This particular MLS gasket is 098" thick and is comprised of five layers of stainless steel. The outer layers are an embossed Viton coated stainless steel providing a superior seal with excellent rebound characteristics and are corrosive resistant. MLS head gaskets reduce bore distortion and withstand extreme cylinder pressures. These head gaskets have a 0.001" thick layer of viton on the stainless steel gasket which provides the sealing element against extreme combustion chamber pressures. There are no composite elements to these head gaskets. O-rings are not required with these head gaskets. This gasket is absolutely ideal for situations where too much material has been machined from the cylinder or deck faces and the compression ration is too high. Alternatively if the compression ratio needs to be lowered, for supercharging or turbo charging then this head gasket is a route to resolving this. This gasket is approximately 98 thou thick so is approximately 40 thou ( 1mm ) thicker than a standard composite gasket.

£210.00 (including VAT)
£175.00 (Excluding VAT)

Related Parts:

Cylinder head gasket
Part No - TVR E6026

Standard TVR cylinder head gasket to fit all Speed 6 engines

Cylinder head bolt
Part No - TVR E6022

Standard cap head bolt to fit TVR Speed 6 engine

Cylinder head gasket O ring
Part No - TVR E2637

To fit all TVR Speed 6 engines with standard head gasket configuration

TVR Parts | Contact | Terms & Conditions | Privacy | How to Buy